Everbuild Roll and Stroll Premium Carpet Protector 75 meters
Barcode: 5029347605643
MPN: ROLL75
EVERBUILD 75M ROLL & STROLL PREMIUM CARPET PROTECTOR Protects against mess, dirt, staining, spillages and soiling that occurs during painting, plastering, building, tiling, general maintenance window replacement repair work or Party Mess. Roll & Stroll is ideal for protecting all carpets except really long pile carpets suitable for stair carpets fits perfectly on most standard size stair treads Can be used for commercial and domestic applications.
Application
- Ensure surfaces to which Roll and Stroll is to be applied are clean sound, dust free and dry.
- Remove outer packaging from roll.
- Place roll on the floor facing the direction it is to be applied and unwind approx 12 inches 300mm of material.
- Ensure the roll is stuck by smoothing out by either hand or foot.
- Simply push roll forward using hands or feet ensuring roll goes in a straight line.
- Smooth out with hands or feet as it unwinds.
- A
very effective way of laying Roll and Stroll is to push the roll along
with a soft broom using the brush to smooth out and remove air bubbles
as it unwinds.
Main Points
- 75mm long roll
- As Roll and Stroll is totally waterproof it gives piece of mind against expensive to clean paint and Liquid spillages.
- Due to the adhesive face being reverse wound Roll & Stroll easily unwinds making application easy.
- Easy roll out with no specialist applicator equipment required.
- Will not creep and wrinkle after application stays where it is put.
- Easily removed and will not leave a sticky residue.
- Can be left down for up to 4 weeks.
- Adheres to most common carpet types
- No trip risk Safer than dust sheets.
Roll & Stroll Premium Carpet Protector Limitations:
This product is for application to carpets only not hard surfaces use Roll and Stroll Hard Surface Protector.
Vacuuming prior to use is recommended.
Roll and Stroll must be removed after a maximum of 4 weeks to prevent a sticky residue being left.
In heavily trafficked areas or where air temperature exceeds 220 deg C remove Roll and Stroll after only 1week.
Do not use under floor heating whilst product is in situ.
Application of Roll & Stroll:
Ensure surfaces to which Roll and Stroll is to be applied are clean sound, dust free and dry. Remove outer packaging from roll. Place roll on the floor facing the direction it is to be applied and unwind approx 12 inches (300mm) of material. Ensure the roll is stuck by smoothing out by either hand or foot. Simply push roll forward using hands or feet ensuring roll goes in a straight line. Smooth out with hands or feet as it un winds. A very effective way of laying Roll and Stroll is to push the roll along with a soft broom/brush using the brush to smooth out and remove air bubbles as it unwinds.
Everbuild ROLL75 Official Information:
Everbuild Premium Roll and Stroll Technical Data Sheet
Everbuild Premium Roll and Stroll Safety Data Sheet
Everbuild Roll Stroll Premium Carpet Protection Product Page
All Roll and Stoll Protective Surface Film





























Reviews
There are no reviews yet.